Wreath frame designed for Mel's Pancake Recipe Bundle comes with the 14" frame, 10" frame, and sign extender center. 1/4" thick *patent pending* How to use the frames: Step 1: Add your pipe cleaners Put a pipe cleaner through each larger, center hole and bring it to the other side of the notch, then twist the pipe cleaner. Do not put pipe cleaners through the smaller holes near the inner center of the frame. Those smaller holes are for signs and bows. Step 2: Cut the mesh Cut 20-inch pieces of mesh. If you’re making a 10-inch and 14-inch wreath frame (and using only six pieces of mesh on the smaller frame), you’ll only need ONE roll of mesh for both wreaths! Step 3: Make and attach your mesh ruffle Lay each mesh piece out and scrunch the mesh starting at the bottom, pulling it toward you. Pinching the center (the cluster will look like a butterfly), lay the ruffle between each pipe cleaner. You’ll want to start on the outside notches first, just like a normal pancake style, and complete steps 4-6 before starting the inner notches. Step 4: Cut and fold your ribbon Using two, 2.5-inch ribbon designs, cut 12, 14-inch ribbon tails – making 24 tails total. Once the ribbon is cut, take one of each ribbon design and layer it on top of the other. Fold each ribbon pair in half. Step 5: Add ribbon to your frame Starting with the outer ruffles, lay each ribbon tail in a pipe cleaner, over the mesh ruffle, and twist the pipe cleaner. The ribbon should be in a “v” shape with the ends facing out. Pull the ribbons apart and to the sides, so both ribbon designs show. Step 6: Add florals If you want to add additional features, like florals, simply lay the stems into the pipe cleaners (florals facing out), over the ribbon and twist the pipe cleaner. Once you’re finished adding the ribbon and (optional) florals, cut the excess pipe cleaner.